View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of AKROMID® A3 GF 60 1 natural (2396) - PA66-GF60 - Akro-Plastic GmbH

Material Data Center offers the following functions for AKROMID® A3 GF 60 1 natural (2396):
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Akromid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección

Any use of this information falls under the rules of our disclaimer.

Caracteristicas de procesamiento y fisicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Contracción posterior al moldeo, paralelo

0.4 / *

ISO 294-4, 2577

Contracción posterior al moldeo, normal

0.8 / *

ISO 294-4, 2577

Propiedades mecánicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Módulo de tracción

20500 / 15800

MPa

ISO 527

Resistencia a la tracción

260 / 190

MPa

ISO 527

Alargamiento a rotura

2 / 2.5

ISO 527

Módulo de flexión, 23°C

19800 / -

MPa

ISO 178

Resistencia a la flexión

400 / -

MPa

ISO 178

Resistencia al impacto Charpy, +23°C

102 / 105

kJ/m²

ISO 179/1eU

Resistencia al impacto Charpy, -30°C

97 / -

kJ/m²

ISO 179/1eU

Resistencia al impacto Charpy c/entalla, +23°C

19 / 22

kJ/m²

ISO 179/1eA

Resistencia al impacto Charpy c/entalla, -30°C

19 / -

kJ/m²

ISO 179/1eA

Ball indentation hardness

330 / -

MPa

ISO 2039-1

Propiedades térmicas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Temperatura de fusión, 10°C/min

262 / *

°C

ISO 11357-1/-3

Estabilidad al calor, 1.80 MPa

260 / *

°C

ISO 75-1/-2

Estabilidad al calor, 0.45 MPa

260 / *

°C

ISO 75-1/-2

Estabilidad al calor, 8.00 MPa

235 / *

°C

ISO 75-1/-2

Combustibilidad a espesor h

HB / *

class

IEC 60695-11-10

Espesores de probeta

0.8 / *

Yellow Card disponible

sí / *

Glow Wire Flammability Index (GWFI)

650

°C

IEC 60695-2-12

GWFI - thickness tested (1)

1.6

Propiedades eléctricas

Seco / Cond

Unidades

Método de ensayo

ISO Data

Resistividad volumétrica específica

1E11 / 1E8

Ohm*m

IEC 62631-3-1

Resistividad superficial específica

* / 1E10

Ohm

IEC 62631-3-2

Indice comparativo de linea de fuga

600 / -

IEC 60112

Otras propiedades	Seco / Cond	Unidades	Método de ensayo
Absorción de agua	3.7 / *	%	Sim. to ISO 62
Densidad	1710 / -	kg/m³	ISO 1183

Recomendación para procesamiento Moldeo por inyección	Valor	Unidades	Método de ensayo
Temperatura de la masa	320	°C	-
Temperatura del molde	100	°C	-
Presión de inyección	75	MPa	-

Características

Procesamiento y forma de entrega

Moldeo por inyección

Forma de suministro

Color natural

Características especiales

Estable contra el calor

Applicaciones

Automotriz

Disponibilidad regional

Europa, Asia Pacifico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.